Endo Kogyo India Private Limited

With its enclosed casing, this balancer prevents dust from scattering and therefore can be used in a clean room.
The casing is conductive but grounding can be achieved using an earthing wire.
The bracket enables easy installation.
(Installation diameter Φ32 mm)

• Plastic drum, which reduced the powder from rope abrasion; replaceable wire rope
• Fall arrest device to keep tools from falling if the spring breaks
• Riveted spring to enhance the safety of spring replacement
• Fully enclosed housing

ERP Series Spring Retractors are an economical choice for the suspension of tools when "zero gravity" is not required.
Tension adjustment is easily performed without tools using the integrated handle system
Unit includes an adjustable stopper to that can be positioned to limit the stroke.

EK Series Balancers provide true "zero gravity" tool holding with no drifting or strain.
The units have high impact cast ABS housings.
Tension adjustment is easy and precise.

RSB Spring Balancer is able to unload the suspended by using the ratchet.
RSB Series can be used in the application at where the suspended load with the same weight has to load and unload.

• Gauge
• Drum lock
• Fall arrest device
• Plug type wire rope installation

Features:

• It uses one-way clutch lining braking system and it hangs up tools slowly.
• Snap back with slow speed helps speedy and safe work for you. 
• Set brake free, you can use it as normal balancer. 

Specification:

The Series "ECO" Spring Balancers are the "eco-friendly" balancers. They are the ultimate solution when particulates from the standard exterior balancer finish might contaminate food or sensitive assemblies. 

The specific features of the "X" version are:

• Buffed and barrel-polished casing and cover
• Synthetic food-grade grease (H1 grade) on the spring
• Stainless steel lower hook, plug, rivet, bolts, and screws
• Zinc plated upper hook and pins

Rope Types:

• EWF-9 to EWF-15: Black Nylon, 4 mm diameter
• EWF-22 to EWF-120: Stainless Steel, 4.8 mm diameter

The Series EW-Y, EWS-Y, and EWF-Y tool balancers are aso "eco-friendly" balancers. These are ideal when particulates from the standard exterior finish might get into food or sensitive assemblies and where a buffed/polished housing and food-grade grease are not required.

The specific features of the "'Y" version:

• Unpainted casing and cover (not buffed)
• Standard grease on the spring
• Zinc plated steel lower hook, plug, rivet, bolts, and screws
• Clear painted rivet
• Zinc plated upper hook and pins

The EWF Series features fully enclosed housing, fall-arrest device (auto-brake), and manual drum locks.

If a spring breaks, the brake automatically locks to prevent tool damage.

The manual drum lock keeps the drum from rotating to allow easy change out and maintenance of tools.

Springs are enclosed in a replaceable cartridge for safe and easy repair.

EWF Series Balancers are also available in an unpainted version.

Features of Spring Balancer:

• Gauge
• Plug type wire rope installation
• Cartridge spring assembly
• Drum lock
• Fall arrest device
• Worm gear spring adjustment

ELF Long Stroke Spring Balancers are designed for high ceiling applications.
They provide true "zero gravity" tool holding with no drifting or strain.
The tapered drums and quality springs and bearings provides smooth cable travel throughout the stroke.
Tension adjustment is easy and precise.

The ELF models offer both the automatic brake and the manual drum safety lock. In the event that a spring breaks, an automatic centrifugal brake engages and locks, preventing damage to the tool.
With the manual lock engaged, the drum will not rotate.
This allows for easy change out or maintenance of tools.

Features:

• Gauge (except ELF-3/5/9)
• Plug in wire rope replacement
• Cartridge spring assembly (except ELF-3/5/9)
• Drum lock
• Fall arrest device
• Worm gear spring tension adjustment

Despite being compact and lightweight, this reel provides a long stroke of up to 4m (winding length).

Due to the use of a cylindrical drum, the tension (winding force) increases gradually as the wire rope is pulled out.

The cylindrical drum also prevents cable jamming even when you pull out the wire rope in an oblique direction. Balance is obtained at the preset height and the wire rope is wound up after being pulled out again.

The models with the ratchet mechanism (ER-3A, 5A, 10A) can be stopped even during strokes.

Specification:

The ETP high capacity balancers offer true zero gravity, with no drifting or strain.
Tapered drum, quality springs and bearings provides smooth cable travel throughout the stroke.
The ETP Series is used for welding guns, large impact wrenches, nut runners and other heavy tools.
All high capacity ETP balancers include the fall arrest device (auto-brake).

Feature:

• Cast aluminum case
• Forged Steel Swivel Hook

• The internal fall-arrest device prevents the air tool from dropping even in the unlikely event that the spring breaks.
• With a large hose inner diameter of Φ8.5mm, a sufficient air flow rate is ensured for air tools to operate reliably.

Specification:

ER Series Torque Reels are light-weight and compact.
The long cable travel makes them suitable for hanging push button pendant stations and similar devices.
Cylindrical drum prevents cable jamming.

• Cable diameter: 2.38mm
• Cast aluminum case
• Available with ratchet lock mechanism (ER-A),
  or without (ER-B)